1 / 1
Fullwood Merlin M2 Milk tube divider roller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the roller that runs on top of the milk tubes in a M2 Automatic Milking System
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed it in PETG and it works fine. PLA is probably not heat resistant enough (hot water cleaning).
Use 4 Perimeters and 20% Infill, no support needed when printed upright.
