Gridfinity 1x5 dovetail socket rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 1x5 socket rail with two dovetail rails in it, allows you to slide in either 1/4 or 3/8 sized socket holder.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 439
- Wydruki
- 7
- Wyświetlenia
- 2388
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is taking SamHain07's dovtail style socket rail and slap in onto gridfinity 1x5 baseplate.
I have included 1/4 and 3/8 sized socket holders.. I do not use 1/2 sized socket so can't test the fit for that size. If you use 1/2 sized please modify it to fit your need.
There is also no end stop.. I simply aim the rail opening to either the tool box wall or another gridfinity box to keep the bit in. It should be trivial to put a screw or glue something to keep the socket holder in place.
If you have oversized socket it might reach over the edge of the base plate. Plan a bit on how you will place these rail so it won't hit a wall.