1 / 1
Spool Rod Spacer for 5/16 inch or 8mm thick rod — zdjęcie 1

Spool Rod Spacer for 5/16 inch or 8mm thick rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For 8mm or 5/16 center rods. The inner diameter is 8.2mm. In slicer scale the Z to whatever length you like.

Ocena
5 / 5
Polubienia
4
Pobrania
77
Wydruki
1
Wyświetlenia
441
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

Part of my filament path design -

This is a simple part that took a minute to design, but serves an important purpose. If you have a spool holder and need a spacer between parts you can size this according. The hole is 8.2mm in diameter. The walls are 2.5mm thick. I use on 5/16 inch rods but it would also work with 8mm rods.  You can make it any length you want or print several of these and put them end on end.

Print it with 3 or 4 perimeters until there is no infill. It is 15mm long but you can unlock the dimensions in Prusalicer and make it any length you want along the Z axis. I made a few at 5, 10, and 15mm long for example.

Tagi