Trumpet Mute Set (5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of (5) different trumpet mutes that I commonly use in jazz - straight, cup, Harmon, bucket, and bubble.
- Ocena
- 4,786 / 5
- Polubienia
- 220
- Pobrania
- 1790
- Wydruki
- 14
- Wyświetlenia
- 6378
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All of these mutes have been played and tested. The sound is similar to the stone lined mutes. In this generation I've thinned out the walls and opened up the stem holes to make them a little brassier and louder, especially on the bubble and the Harmon mutes. Just a quick tip if you haven't played a bubble mute, it takes some getting used to - the others I swap in and out for my conventional mutes.
Printing notes:
- No support has been needed to print assuming you just stand them up on the end.
- I've printed in PLA, PETG and ABS all without issue - latest generation (green) is all PETG.
- I print with a 0.4mm nozzle, and the wall thickness is 1.2mm in these STL files, so no infill is needed and they're rigid enough for use.
Finally for the corks I've found that self adhesive cork squares for coasters work amazingly well for pretty cheap. This set on Amazon is $8 for 40 coasters. For the Harmon and bubble mutes I go single layer. For the cup, straight and bucket I double stack. A utility knife or scissors cuts as needed.
Let me know if you have any questions. I've played these in gigs without issue.