Resin curing chamber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't happy with any of the options that were readily available to purchase or download and print, so I made my own.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I wasn't happy with any of the options that were readily available to purchase or download and print, so I made my own. It is big enough to accommodate the print volume of a small resin printer, ie. phrozen sonic mini.
Print instructions
I printed with .2mm layer hight. All surface parts were printed with 50% infil, with Prusament PLA. The hinges and brackets were printed at 100% infil, with Matterhackers PETG. To complete this project you will need to print to following:
20ea. Brackets
4ea. Feet (I preferred Flexible filament for this part)
2ea. Side panels
2ea. Doors
2ea. Handles
4ea. Hinge1 (I preferred PETG)
4ea. Hinge2 (I preferred PETG)
The hardware needed includes the following:
40ea. M3-.50x9 bolts (HEX socket or Philips)
40ea. M3-.50 Nuts