Yet another dust cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Most "dust filter" designs can't accommodate PC4 (bowden tube) connectors.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Most "dust filter" designs can't accommodate PC4 (bowden tube) connectors. It may be an issue, especially when working with Prusa MMU2 unit and "self rewinding" spool holders.
In additional my spool holders are a bit taller than usual (to accommodate bigger spools), so "flat mounted" cleaner housings bring more friction.
So I've designed yet another dust filter - this time with place for PC4 coupler and a bit rised :)
Print instructions
Just print, M6 PC4 coupler should fit "as is", but M6x1.0 taper would make things easier.
Recommended settings: 3 perimeters, 5-6 top/bottom layers.
There is another version dustfilterv2a.stl - with reversed mounting tabs.