1 / 1
25mm ( 1" ) PEX tubing hanger / clamp / clips — zdjęcie 1

25mm ( 1" ) PEX tubing hanger / clamp / clips

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp for use in tube-in-tube ( rør-i-rør ) tubing. Made for Roth. 25mm tubing.

Ocena
0 / 5
Polubienia
9
Pobrania
81
Wydruki
1
Wyświetlenia
506
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Clamp that is designed to be used in tube-in-tube (or "rør-i-rør" in Norwegian) tubing systems. The clamp has been specifically created to be compatible with Roth's 25mm tubing, but it is possible that it may also work with other types of tubing.

Use a ordinary plywood screw to fasten them.

Printed using PLA, but for longivity reasons you might decide to go with petg, ABS or ASA?. But as far as i can see my PLA stands up fine to the flexing. Also this is mounted in a dark area. Lifespan of the rør-i-rør is 90 years(ish). So you need to evaluate yourself if it is ok. :)

Keywords

Bracket, pex, rør i rør, sintef, roth, uponor

Heavly inspired by https://www.printables.com/model/142557-34-pex-tubing-hanger-clamp

Tagi