Parametric Glasses with OpenSCAD and SVG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric glasses that you can make into any shape using SVG of lens, frame, and arms.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 314
- Wydruki
- 0
- Wyświetlenia
- 1502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Inspired by Ericsko, this model is built using OpenSCAD. To customize, you'll need SVG outlines of the following:
- Lens (you'll definitely need your own)
- Frame (half of it)
- Arm (just one, of course)
Take a photo of above parts. Create an SVG using tools like InkScape (Path>Trace Bitmap tool). Run the .scad file to load the SVG file, then adjust the hinge location.
The hardest part is fitting the lens to frame. Play with scale until the frame fits the lens model (lens model creates the “hole” in the frame, so you'll need accurate size and shape). Nose pad is under development.
This is a draft (as you can see from zip ties) model. Please feel free to create your own version.