Reverse Bowden Filament Cap with Extra clearances
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reverse Bowden cap. Design addresses clearance issues with IR sensor bolt and filament bearing housing "See Details"
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 227
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
MK3S+
Addresses clearance and thickness issues with IR sensor bolt head and filament ball housing block protruding. I tried a few other makes but they weren't sitting flat on my unmodded mk3s+. If you're having clearance issues or just looking for a reverse bowden extruder cover this should do the trick!
*I printed it at 0.15 layer height to make the threads cleaner for the threaded insert
*designed for the pc4-m10 (4mm od tubing insert)
*print flat on top for best thread results
*uses original bolt
*it is recommended to print in black, but I tested the filament runout sensor with the gray asa and it did work fine. Make your own decision on that
It has “ASA” on the surface because I printed mine in asa, I'll edit the design and get a blank one up there soon. I prototyped it with Pet g printed nicely
Happy Printing!