rEvo III Rebrether Drying Splash Guards

Contents

• Scrubber
  • Main model providing the primary shape for the scrubber cover
  • Vent Modifier model to be used to remove top/bottom perimeters allowing for ventilation
• Male Cap
  • Main model providing the primary shape for the covers to go on the ends of the loop
  • Vent Modifier model to be used to remove top/bottom perimeters allowing for ventilation
• Female Cap
  • Main model provides the cap, no vent is provided to prevent the ingress of rain

Printing instructions

These instructions are written for PrusaSlicer 2.1.1 but can likely be adapted as needed. All three components can be printed at once on a Prusa Mk3 requiring only two identical prints for a complete set of guards.

1. Import the main models.
2. With one model selected, right click on the Editing box on the right for that model.
3. Select Add Modifier > Load... and select the appropriate vent modifier from the download.
4. Right click on the Editing cog for the modifier and select Layers and Perimeters.
5. At the bottom of the parts list, edit the modifier to have 0 perimeter layers top/bottom.

The photos provided (modified to include branding) were printed with PETG at 15% gryoid infill, except the scrubber cover vent modifier also had an infill adjustment up to 20% to provide a slightly denser mesh. The gyroid pattern produces a complex pattern that it is difficult for water to pass through against gravity, but easy for air to move around allowing for drying.

If using PETG I recommend testing the adhesion first as they can separate easily.

Print Settings

Printer Brand:

Prusa

Printer:

Supports:

No

Resolution:

Infill:

15/20%

Filament:

Notes:

Threading

Category: Sport & Outdoors