Double Glue Stick Holder - HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold your favorite glue stick and a backup for all your adhesion needs.
- Ocena
- 4,854 / 5
- Polubienia
- 431
- Pobrania
- 2367
- Wydruki
- 50
- Wyświetlenia
- 4688
- Oceny
- 41
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your favorite glue stick and a backup close at hand with this dual glue stick holder for the honeycomb storage wall system. Fits into two empty inserts for the HSW system as well. Fits the 21/22g glue sticks or anything under 27mm diameter.
Original model based off of the @juicebox design for the Skadis system, but fit for HSW. Also made a few changes in design for easier printing without supports and flattened the bottom so the sticks wouldn't wobble.
Printing Notes:
- Layer height: 0.2mm
- Filament: PLA
- Infill: 15%
- No supports
This is part of my version of the Honeycomb Storage Wall by RostaP. If you want to see my other HSW designs go here: https://www.printables.com/@FixThisBuildThat/collections/580572
For the full video of my HSW wall check it out on the Fix This Build That YouTube channel: https://youtu.be/NsBqs3TRjqQ