IPhone 14 Pro Max Pop Socket Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a spot for a pop socket. Hole allows gyroid effect and pop socket use at same time.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 601
- Wydruki
- 4
- Wyświetlenia
- 4080
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I recommend a softer durometer TPU but armadillo will work. Hole allows you to stick your pop socket directly to the back of your phone while keeping the gyroid effect.
I added 3 versions;
-Version one has a bigger hole for you to get your finger behind the pop socket.
-Version two has a smaller hole for a more streamline look and feel.
-The third version has the smaller hole, but also has bumpers on the front of the case to protect a screen-down drop.
-The fourth version is full, no holes. And the top edge of the case is increased for better screen protection. (like the bumpers but around the full edge)
Print Settings;
TPU filament recommended for flexibility
0.8mm nozzle
0.32mm layer height
25mm/s
0 top layers
0 bottom layers,
20 % gyroid infill.
Happy printing!