1 / 2
Sovol SV06 Plus On-Printer Tool Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fastener-free tool organizer for the SV06 Plus. This accommodates the printer-servicing tools plus 3 MicroSD cards.
- Ocena
- 4,667 / 5
- Polubienia
- 85
- Pobrania
- 661
- Wydruki
- 11
- Wyświetlenia
- 3898
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 11) (Komentarze: 37)Remiksy (3)Kolekcje (161)Powiązane
This tool organizer for the Sovol SV06 Plus is designed to snap onto the top of the vertical extrusion that the power supply is mounted to. It is a snug fit and will require a little coercing. The idea was to house all of the tools needed for printer adjustment and maintenance.
It fits the following tools included with the printer:
- Nozzle wrench
- Double-sided open end wrench
- 2 x single open end wrenches
- 5 allen wrenches
- Small screwdriver
- 3 MicroSD cards (only one included with the printer)
This can be printed without support and 10% infill (cubic) works fine.
***UPDATED V2***
V2 Changes:
- Wrenches reoriented front-to-back to eliminate the potential conflict with the extruder cable
- Troughs added to keep the allen wrenches aligned
- Top clip eliminated because of marginal benefit
1x3 Gridfinity Baseplate for SV06 Plus shown in photo background.