Workbench Hand Tools Organizer

Imported from https://www.thingiverse.com/thing:3374303 

A workbench hand tools organizer, focused mainly on storing small hand tools used in model-making, 3d print clean-up, and electronics prototyping.

Can be mounted on fzr400's Lazy Susan, for easy tool access.

Features a top area intended to hold mbeyerle116's Tool Carousel, as show in the pictures.

See drawing for details of print and hardware parts needed. Note, the main body is a fairly large print.

List of Features / Compartments:

• 10 13.5 Diam x 58mm deep tool holes, with 3 additional holes possible using the optional well plate. Works well with these testubes (~12mm Dia, and 75mm in length) and my test tube X-Acto Blade Holders. 
• 14 34 x 4.85mm sq holes for hand files. 
• 3 149 x 41.8 x 21.66mm draws with racks for Dupont jumper wires (also available w/o the racks). 
• 6 2mm holes, creating a rack for X-Acto blades (use my M2 Thumb Screws to secure them). 
• 6 hooks for pliers, 95mm max height to the pliers fulcrum w/ lazy susan, 80m w/o (can probably only hold 2-3 pliers at once, but there should be space for other things on the remaining hooks). 
• 2 81 x 21 x 35mm horizontal holes for general storage. 
• 2 36.7 x 23.66 x 25mm vertical holes for general storage. 
• 1 61 x 52 x 23.66mm vertical hole for general storage (covered up if you use the optional well plate). 
• 1 81 x 52 x 28.66 vertical hole for pens, etc. 
• 1 83 x 75 x 57mm horizontal hole for general storage (works great with cnc bits packs ). 
• 1 130 x 47mm flat plane for general storage. 
• 1 75 x 83mm flat plane for general storage or to hold Tool Carousel.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

10-15%

Category: Tools