Vented Case for CZH-Labs D-1077 Low Voltage Cutoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vented case for low voltage cutoff pcb from CZH-Labs (D-1077). Case has standoffs with locating pegs for PCB corners.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Vented case for low voltage cutoff pcb from CZH-Labs (D-1077).
Case has standoffs with locating pegs for PCB corners. Pegs can be melted with soldering iron to "mushroom" them and hold PCB in place permanently if desired.
Two versions of the Lid are provided. If you have a very well calibrated printer and are not over-extruding at all, the "_CaseLidTight" includes some flared areas for a tighter fit. Otherwise, if your printer tends to over-extrude at all, the "_CaseLid" with straight sides will likely fit better.
Sketchup design file (.skp) included.
I printed in transparent PETG so the LED would be visible in operation.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
No
Infill:
20%
Category: Electronics