Stealthburner LGX with EBB42 and filament sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This uses mostly hardware that the voron 2.4 uses as well as hardware that the LGX comes with. You will need an…
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1965
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This uses mostly hardware that the voron 2.4 uses as well as hardware that the LGX comes with. You will need an additional limit switch, 7mm ball bearing and 3010 blower fan.
Some supports needed
Print with voron print settings
The pneumatic fitting on top for the reverse boden is optional but works much better than the one that is on the LGX.
The fan version is strongly suggested to keep the board and motor cool. I wired the fan into the hot end fan so that it is on any time the machine is printing.
Print Settings
Printer Brand:
VoronDesign
Printer:
Voron2 300
Rafts:
Yes
Supports:
Yes
Resolution:
.2
Infill:
40%
Filament:
Overture ABS
Notes:
Voron part print settings
Category: 3D Printer Parts