1 / 2
Sapphire S Dragon Hot end & Driect BMG extruder mount — zdjęcie 1
1 / 2

Sapphire S Dragon Hot end & Driect BMG extruder mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some time ago I realized that I couldn't get more speed on my sapphire because of the inefficient hotend. I decided to…

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Some time ago I realized that I couldn't get more speed on my sapphire because of the inefficient hotend. I decided to mount the Dragon hotend and that was the beginning of many problems. I tried many different projects but I wasn't satisfied.

I have made this mount as simple as possible.

Anyway, I had to reduce the print area to 172cm in the Y axis and increase z to 230cm.

There is also a touch mount bl. quite far from the nozzle (70mm), but I couldn't find a better place for it.

To use this mount, you will have flip linear gear in z axis.

Category: 3D Printer Parts

Tagi