ESP explorer electric guitar model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electric Guitar model based on ESP explorer. STL file is more or less 1:1 scale. For printing I've used 0,35 scale…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 1228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Electric Guitar model based on ESP explorer. STL file is more or less 1:1 scale. For printing I've used 0,35 scale factor, in my opinion it give best results. 0.2 layer for body and 0.1 layer is ok.
Neck is divided in 2 pieces for easier printing. Neck head is flat, so it's good to bend it a little bit using heat.
For painting I've used acrylic model paints. Stings may be made by any thread, and glued to bridge.
Check out my other designs:
Ibanez Jem – https://www.thingiverse.com/thing:5026320
Bc Rich Warlock – https://www.thingiverse.com/thing:5103842
Ibanez Iceman - https://www.thingiverse.com/thing:5231125
Fender Stratocaster - https://www.thingiverse.com/thing:2748193
Fender Telecaster- https://www.thingiverse.com/thing:4056363
Gibson Flying V https://www.thingiverse.com/thing:2747925
Gibson Les Paul - https://www.thingiverse.com/thing:2839766
PRS Mark Tremonti - https://www.thingiverse.com/thing:3421690
Dean Dime From hell - https://www.thingiverse.com/thing:2748202
Gibson Sg –https://www.thingiverse.com/thing:5350017
Dean Rebel – https://www.thingiverse.com/thing:5359480
Jackson RR - https://www.thingiverse.com/thing:5437801
Print Settings
Supports:
No
Post-Printing
Category: Music