2x AA and 14500 battery snap holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Durable battery holder that fits 2 AA or 14500 batteries
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 135
- Wydruki
- 4
- Wyświetlenia
- 812
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can buy these from me here!
Consider supporting us on Patreon!
These are battery holders that can hold (2) AA or (2) 14500.
I print these out of PETG for the toughness. My builds use a 0.6mm nozzle and 0.2mm layer height for the battery holder body, and 0.4mm nozzle with 0.2mm layer height for the lid.
These do require an extra screw for the hinge. I use a stock part from Mcmaster-Carr.
Some people have asked about metric screws. I think this metric screw from Mcmaster-Carr will work, but I have not tried it. It could require some drilling to get it to fit. Let me know if you give it a try!