Corsair Vengeance 2100 Earpad Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a adapter to put new Corsair Virtuoso Earpads on a Vengeance 2100 Headset.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
This is a adapter you can put on your old headset to mount some new earpads, since those who came on those headsets originally are falling apart by now. To install this adapter you first have to carefully pull off the old earpad along with the blue ring thats under it. That ring is only held by double sided tape so it shouldn't be too hard. After that remove any excess tape that might still be on the headset. Now put some fresh tape around the edge of the headset around where the original has been. MAKE SHURE YOU STICK THE ADAPTER ON THERE SO THAT THE SIDE THAT IS COMPLETELLY FLAT FACES OUT. The side with the step around the hole should face into the headset.
I would suggest first trying if the new earpad fits into the adapter before sticking it down.