1 / 3
Steering wheel for Go Kart/ Lenkrad für Gokart
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steering wheel for Go Kart/ Lenkrad für Gokart
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 269
- Wydruki
- 2
- Wyświetlenia
- 1262
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
After I found a Go Kart in the garbage because the steering wheel was damaged, I decided to draw a steering wheel to 3D print it.
Size of the steering wheel: Ø197,5 mm
Hole diameter for the Shaft: Ø23 mm
Print instructions:
Filament: PLA
Layer Height: 0,2 mm
Supports: Yes