1 / 5
Magnifying Lens Clip for BetaFPV VR02 FPV Goggles — zdjęcie 1
1 / 5

Magnifying Lens Clip for BetaFPV VR02 FPV Goggles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple clip for attaching magnifying lenses to FPV goggles for folks who need reading glasses

Ocena
5 / 5
Polubienia
16
Pobrania
113
Wydruki
2
Wyświetlenia
998
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

If you need reading glasses you might have trouble seeing a sharp image on FPV goggles. 

With this clip you can attach lenses from inexpensive workshop magnifying glass like these (I couldn't find a place to buy just the lenses).  Be sure to get the kind where there is a notch for your nose.

This clip fits specifically the BetaFPV VR02 goggles which come bundled with some of their Cetus kits. It was inspired by @vindolin's clip for the Eachine Goggles. Though I modeled a thinner version of the clip as there isn't a lot of space on these goggles. 

Attach the lens to clip, remove the foam, and attach it to the edge, then put the foam back on. 

I wear +1.75 reading glasses and the 2x lens works for me, but you have to test your own. 

Print on the side without supports


I also included a file with just the part that clips to the lens in case you want to reuse it for other goggles or projects. 

Tagi