Small Angled Rolling GoXLR Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small angled stand for the GoXLR sound mixer, with optional wheels to roll back and forth.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to make another GoXLR base with wheels, but without drawers and small enough to print in one piece on my Prusa Mini. It's designed to print vertically on the rear edge, so it's possible to print more than one at a time which is a bonus if you're into that for some reason.
This one will not fit the GoXLR Mini unfortunately, just because the middle notch on the GoXLR is a lot wider and I use a hump in the middle of the same width to keep it from sliding left or right. I will try and find the dimensions of the notch on the Mini at some point and add that model as well if someone wants it.
I print this stuff with Polymax PLA and don't know how strong it is with normal stuff or what infill might be needed. I printed mine at 10% and it's more than stiff enough.