1 / 2
TomTom Go Adapter M5 Screw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach your TomTom GO using this and a M5 Screw instead of the included windscreen foot.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
Attach your TomTom GO using this and a M5 Screw.
There's a 25mm thread long M5 thread in the adapter, try to use a screw that uses most of it, to massively decrease the chance of failure.
Tested with TomTomGo Expert Camper Max and Start 50.
I printed this with the following Settings:
- eSun ABS+ (ASA would be even better for maximum UV resistance)
- 0.2mm layerheight
- 0.6mm nozzle
- Organic suppports on the buildplate for the lower part of the ballend
Fusion 360 source attached so you can adjust thread tolerances.
The default tolerance is 0.1mm, simply change the parameter!
Use the Fusion 360 timeline when you're in need of a different thread size (or write me a comment).