1 / 4
Fidget Worms (loose/tight fit test print, 10/15/20 segment) — zdjęcie 1
1 / 4

Fidget Worms (loose/tight fit test print, 10/15/20 segment)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a reupload of Fidget Worms by DaveMakesStuff at thangs.com.

Ocena
0 / 5
Polubienia
20
Pobrania
244
Wydruki
3
Wyświetlenia
1045
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Fun print and great model. 15 segment, loose fit. Penny for reference. 

This is a reupload of Fidget Worms by DaveMakesStuff at thangs.com.

 

"These print-in-place Fidget Worms are hard to put down! When you do manage to put them down, use the handy Storage Apple to help them stay warm and safe.

See here for video: https://youtu.be/siRw-CrxgEA

See here for stable downloads:
Fidget Worms: https://social.thangs.com/m/731826
Storage Apple: https://social.thangs.com/m/731839

The worm segments are connected using an enclosed ovoid joint that creates a firmer and more controlled connection than the “linked rings” joint used in most articulated designs. Print the Worms as oriented flat on the build plate. Once finished, allow the print to cool and then give each joint a small twist to free up the movement. The joints may be stiff initially but will loosen up with a few twists and turns.

Worms are provided in 10, 15, 20 segment lengths, plus a small 3 segment “test” worm. Each length comes in “Tight” or “Loose” versions.

The “Tight” versions will give you the best Fidget Worms. Materials, printers and slicers can sometimes yield slightly different results, so try printing the “Test Tight” worm first. If that works fine, then go ahead and print whatever lengths of “tight” worms you like!

If the joints bind and cannot be loosened even with force, try printing the “loose” versions instead."

 

I will share print files once I figure out what I'm doing wrong…

Tagi