Dewalt Tstak Organiser Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts that fit inside the existing trays found in the Dewalt Tstak Organiser
- Ocena
- 4,667 / 5
- Polubienia
- 134
- Pobrania
- 580
- Wydruki
- 3
- Wyświetlenia
- 5172
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are designed to fit into the existing trays so you can split the volume into two sections, the inserts come in small and large and single compartment or double or quad.
The tray sits about half way down inside the original tray alowwing for two levels of storage in the one tray.
The single small tray has a threaded hole in the bottom so you can add an M5 bolt which allows you to pick out the tray.
These are meant to fit quite snugly so they sit correctly in the existing trays.
They can be printed out of anything at any layer height , I used PLA @ 0.3 layer height.