1 / 1
Anker 525 charging station shelf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something to put over my Anker 525 to set a Pi on and still have some air circulation.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 519
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted something to put over my Anker 525 to set a Pi on and still have some air circulation. This frees up a section of my desk for other things, I have a lot of things on my desk.
Printed in PLA at .25 layer height, 20% infill, sliced it top down so it didn't need supports. Cura wants to add supports for the rounded parts, but I turned them off and it came out fine on my Ender 3 S1 with SonicPad (so Klipper)