Leshiy transfer port seal or "puck"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a transfer port seal for the Leshiy 2, also known as a "puck". Similar to:…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a transfer port seal for the Leshiy 2, also known as a "puck".
Similar to: https://www.thingiverse.com/thing:4743779
The main difference from the above and the stock red puck is that:
this is customizable.
this has a gradual transition between the port diameter and the diameter of the holes in the magazine.
Slightly more snug o-ring cavity. You can customize the shape of the o-ring cavity as well, see the .scad file.
There is only rounding on the face that touches the magazine
I have tried this on my Leshiy, and find it offers no functional difference when compared to the stock red pucks. That said, it's cheaper for me to print these than the order the originals.
You will need some 8x11x1.5mm o-rings to use this print. Probably best to print this on a resin printer, as well. It probably needs fairly high resolution to be fully functional.
At present the .stl file is set up only for .17, .22 and .25 calibre barrels. If someone could send me the hole diameters on the magnetic plates for other magazines, I'd be happy to include stl files for those. You can also open the Customizer and simply change the "end_diam" variable. For the .22 magazine, the hole is 4.9mm in diameter. Change that appropriately.
In the picture you see a stock red puck with a black o-ring together with about 18 printed pucks, with the red o-rings.
Category: Sport & Outdoors