1 / 3
Campbell Hausfeld Blowgun to Aquarium Tubing Nozzle — zdjęcie 1
1 / 3

Campbell Hausfeld Blowgun to Aquarium Tubing Nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapts a blowgun to standard Walmart aquarium tubing

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

What is this? 

This model fits the threads of a Campbell Hausfeld blowgun (and maybe other brands?). It adapts the blowgun to the Walmart Aquarium tubing with a 4mm ID. The model includes wingnuts for tightening the nozzle down with ease. It is designed to be used with PTFE tape to ensure a good seal. I was able to use this with 90PSI on the compressor side with no issues. 

The initial purpose of this model was to adapt my air compressor/tank to be used with my laser cutter/engraver. I imagine it may have other uses though. A trip to the hardware store let me know that this would've cost 40+ dollars if I had to use parts sourced locally. This model is a fantastic example of how useful functional 3D printing can be. 

Instructions

Print at 100% infill to ensure that the threaded body doesn't crush and the wing nuts don't break. 

I printed in PETG but I imagine that PLA may work as well. 

Print in existing model orientation

No supports needed

I did not use a brim or any additional bed adhesion but YMMV

Tagi