1 / 6
18650 or 20700 in 6V 4.5AH Size Battery Case — zdjęcie 1
1 / 6

18650 or 20700 in 6V 4.5AH Size Battery Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made to convert old fluorescent Coleman lantern to lithium cells to replace lead acid battery

Ocena
0 / 5
Polubienia
13
Pobrania
50
Wydruki
0
Wyświetlenia
829
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Found my old Coleman lantern with a dead battery. New battery about $15. Let's convert to lithium. Used two 20700 batteries from bad DeWalt XR 6A battery. Two cells in parallel should give me 6AH. I also used an adjustable DC-DC Step Up Boost Module that will also charge the batteries. I adjusted the small potentiometer to around 6.2V.  Amazon.com: 4Pcs 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable DC-DC Step Up Boost Module : Electronics .

While I was at it, I made two versions of the battery box. Type A is for a series 7.2V battery connection using two 20700 or 18650 batteries with sleeve. Type B (pictured) is for a parallel 3.6V battery connection using two 20700 or 18650 batteries with sleeve. Both cases have 3mm holes or slots for the wires for either top or side wire terminal. The battery spacing in the holes are separated by 3mm. The strapping width to connect the batteries is 10mm. The sleeves for 18650 batteries, if needed, I have here: 18650 Sleeve Adapter to 20700 Lithium Battery Size by JEO | Download free STL model | Printables.com . There is relief in the top to allow soldering and wire. The top press fits onto the box. I used electrical tape around the joint where the top and box go together. The box assembly is 1 to 2mm less in width and depth than the lead acid battery and about 15mm less in height. The radius on top and box don't match, not sure why. For what it is 10% infill and 0.8 walls worked fine for me. Assembled size: 68 x 46 x 86mm tall.