HDZero Goggle Walksnail VRX Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the Walksnail VRX to attach to the front of the HDZero Goggle Rails
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 251
- Wydruki
- 0
- Wyświetlenia
- 2086
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
The mount uses the stock screw holes on the back of the Walksnail VRX, but the screws will need to be replaced with longer ones. The stock screws are a different pitch, but I found that M2's hold in the plastic just fine. This mount is designed to be semi permanent, so while there are tabs on the bottom to assist with removal, it's not made to be something that's removed daily. Since this needs to be screwed to the VRX before mounting, it can't be slid on the goggle rails, and needs to be clipped over them.
Only one model side is included, just mirror for the other side
Smaller tab version of the was made to accommodate a larger HDMI connector
Angled version is 20 degrees