Removable Tool Caddy for LACK Enclosure using MultiClip Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removable tool caddy, for LACK enclosure
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 141
- Wydruki
- 5
- Wyświetlenia
- 1759
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used to use @OneTrueMyth's Deluxe Tool Caddy for my Prusa Mk3S. Recently I put it into a LACK enclosure, which isn't large enough to hold the tool caddy. Perusing the usual sites, almost all tool caddy models for the LACK enclosure mount to the legs, which I am not using (the bottom part of the enclosure rests directly on one of my workbenches). Plus, I really like the layout of OneTrueMyth's caddy.
I ended up remixing it, using @layershifter's MultiClip mounting system to attach it to the frame of my enclosure. Using this system, it is easy to remove the caddy without tools.
It features:
- 3 storage compartments
- Side mounts for tools
- 2 clips for Sharpies
- 8 holes for Allen wrenches
- Slots for SD cards
- A large tray for small items such as nozzles or filament clips
- (Optionally) One or more hooks for spatulas, etc.
For CORE One version, see https://www.printables.com/model/1209863
For XL version, see https://www.printables.com/model/473686
Print instructions
I printed everything in Prusament PETG, with a layer height of 0.3mm and 10% infill. I have uploaded GCODE for PETG and PLA.
Print the main model upside down. The Prusa is perfectly capable of bridging the large compartments. If you don't like the looks, use @OneTrueMyth's tray liner.
Also included are MultiClip anchors, to attach the caddy with two 3 mm screws to the side of your enclosure. To help with the alignment I connected the two anchors with a thin spacer that can easily be removed by hand or by using an Xacto knife, after you've marked the screw holes.
Also included is a small hook, for things like a spatula or nozzle brush. Use epoxy or superglue to attach one or more hook to the caddy's side(s).
The 3mf files and GCODE files are configured for a filament swap/color change at 2 mm. I you don't want multiple colors, just reslice the 3mf file in PrusaSlicer and remove the stop in the Preview.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.