Tool Box (Toolbox) for Voron 3D-Printers (Several Versions of Plates included)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on my earlier posted toolbox for Prusa Tools I created a couple Voron plates. Print your individual Voron Box
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 294
- Wydruki
- 1
- Wyświetlenia
- 4888
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: This set of files contains VORON plates which will be glued into the appropriate places of the box itself! THE BOX ITSELF IS HERE:
https://www.printables.com/de/model/440261-toolbox-for-prusa-tools-for-adding-upcoming-xl-or-
So you need to download from both projects: THIS ONE and the PRUSA-BOX, just ommit the Prusa plates and choose your Voron ones from this post. Reason for this is that the Prusa Box has the main "corpus" plus Prusa plates. Insetad of the Prusa plates you may wanna use the plates here in the VORON edition.
This Printables post has couple different stl files, so you can individualize and make your own Voron tool box.
I differ mainly between prints “insert-type” for Multicolor print (color changes within one layer) and “onTop” prints, where you can stop printing at a certain layer and make a color change.
Insert elements (expect plates) are 0.6mm thick, onTop elemenst 0.4mmVersion A has frontplate and top plate. The plates fit a.m. tool box (Prusa).
Assembly after printing. The emblems/letters are 0.6mm thick and the stl-files match geometrically.
I would use a Prusa MK3S+ or Voron with ERCF or Bambu Lab with AMS.
Use layerheight of 0.2mm (first and subsequent) for the multicolor plates. I hope that the box top and bottem iteselves fit your Voron printer. Check it out.
So far my favour for the Voron family which asked me for this.
Good luck!