Magnetic ratchet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic ratchet holder for Snap-on and similar brands
- Ocena
- 5 / 5
- Polubienia
- 301
- Pobrania
- 2743
- Wydruki
- 4
- Wyświetlenia
- 17 895
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A simplistic design that works against the metal wall of your toolbox or face down in your toolbox.
Works best with Snap-on ratchets but will fit other brands with similar body styles.
Magnets used were 6mm x 12mm x 3mm N52 neodymium magnets.
Amazon link to the magnets used:
This prints best with the magnet cutout in the vertical orientation. No supports are required this way.
.20 layer height
100% infill as it will be getting bashed by tools, but 100% is not required.
Has a .3 mm tolerance for the magnet opening.
There is 6 sizes available to fit the 3 most common sizes of ratchets, ¼", 3/8", and ½"
The -2 version has a 1mm wider opening for the ratchet to rest in, this is the version i recommend.
Superglue or epoxy works well for securing the magnets.
magnet opening dimensions:
¼: 25.3mm long x 12.3mm wide x 3.3mm deep
3/8: 30.3mm long x 12.3mm wide x 3.3mm deep
½: 42.3mm long x 12.3mm wide x 3.3mm deep
I have updated the model with interlocking versions, that are ½" spaced apart.
there is 3 different sizes for the key, test which one your printer tolerances work best with.
Also have added a solid block version