Bacteriophage Shot Glasses (remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Bacteriophage pen holder for after-work activities. Designed to carry a shot glass.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix fits the shotglasses I found in my local grocery store (see attached image). The shot glasses are glued down some transparent silicon (which should also make them removable if some cleaning is required). To clean, take care to only use handwarm water and soap and don't let the PLA soak.
Imho this print works best with (semi-)transparent PLA. I highly recommend printing from the 3mf file.
This is because the 3mf file contains some modifiers and settings that I think result in the best print (see attached image with slicer settings). In particular, the brim for the legs is important (otherwise they tend to lose adhesion to the bed). The legs and lower part of the model (below the round features) are at 100% infill (concentric), then the round features and above it the widening capsid have a modifier for 20% infill (concentric), and above that the main hull has 10% (concentric) infill.
Have fun!