Improved Case/Cover for Yamutec USB-REL4-8A Relais (ergonomic version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case/cover for the Yamutec USB-REL4-8A Relais Module
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a case/cover for the Yamutec USB-REL4-8A Relais Module.
This version (1.6) is a slight modification of the previous Model with the following changes:
- added holes for LEDs
- added circular inset at power jumper, so it's easier to grab
- added small overhang at power LED so it doesn't shine right into your eye when looking at it from the side
To attach to the case there are holes in the model (diameter = 3.2mm) which you can use a thread cutter for an M4 spacer/screw for. For us with our printer this didn't work that well, but just screwing in metal M3 spacers worked great. (without thread cutter)
See https://www.printables.com/model/458946 for the previous simpler version, which might be easier for your 3D printer and is also faster to print, as it's completely flat walls there and mostly square shaped.
Print upside-down. (top layer flat on print bed)
Category: Electronics