1 / 7
Eds French Cleat/wallmount Pliers and Crimper Holder/Organizer (for 10, 12 ,15, 16mm tubes and 15, 18mm FC bars, inkl .STEP)! — zdjęcie 1
1 / 7

Eds French Cleat/wallmount Pliers and Crimper Holder/Organizer (for 10, 12 ,15, 16mm tubes and 15, 18mm FC bars, inkl .STEP)!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A French cleat holder for the (crimp)pliers! Inspired by a model by Mikhail on Printables (Thank you!)...

Ocena
4,8 / 5
Polubienia
129
Pobrania
1057
Wydruki
5
Wyświetlenia
3696
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE 07.05.2023:

After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-)

 

A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on Printables, I quickly built a "remix" in Fusion360 where I could use my 15mm aluminum tubes and where the hexagons should not be missing

Depending on the desired length, the holder can be built with two or more side elements

Printed in PETG (0.2mm, 30% infill, 5 bottom/top walls and 4 perimeter), everything fits together very tightly even without glue!

I have uploaded my version incl. STEP file for your modifications!

Take a look for Video/Post about this model on my instagram channel and follow me if you like: https://www.instagram.com/eds_3d_shop/

Thank you for like (if you like it ;-) and happy printing!

——————— ———————

Eine French Cleat Halterung für die (Crimp)Zangen! Inspiriert durch ein Modell von Mikhail auf Printables, habe ich schnell ein „Remix“ in Fusion360 gebaut wo ich bei mir vorhandene 15mm Alu-Röhren verwenden konnte und wo die Hexagons nicht fehlen durften.

Je nach gewünschter Länge kann man den Halter mit zwei und mehr Seitenelementen bauen

Gedruckt aus PETG(0.2mm, 30% infill, 5 bottom/top walls and 4 perimeter), passt alles auch ohne Kleber sehr fest zusammen!

Ich habe meine Version inkl. STEP Datei für Eure Modifikationen hochgeladen!

Für mehr Ideen und Designs - schaut gerne bei mir auf Instagram vorbei: https://www.instagram.com/eds_3d_shop/

Dank für Likes (falls es Euch gefällt ;-) und happy printing!

Tagi