1 / 2
Minimal 6" x 4" Armorer / Parts Tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal 6" x 4" Armorer / Parts Tray - Print in TPU for Non-Slip
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 331
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (20)Powiązane
- Minimal 6x4" Parts Tray.
- Some fillet on the inside edges to pull parts along the edge/wall upwards.
- Stippling on the bottom to more easily grab parts especially with flat surfaces
- Prints in TPU well to make a squishy non-slip tray.
No supports needed
~15% infill is fine