1 / 2
Tactix 507mm Toolbox Lift-Out Tray Hole Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This covers the inconvenient hole in the lift-out tray of the Tactix 507mm Toolbox.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This covers the inconvenient hole in the lift-out tray of the Tactix 507mm Toolbox.
Install the cover by pushing one of the long edges up through the hole from underneath, then rotating the other long edge up above the hole and push down to seat the cover. It's a tight fit and requires a little force, but shouldn't need any glue to stay put. It's a bit of a compromise between making the cover small enough to manoeuvre through the hole but large enough to cover the gap.