LTT Screwdriver Holder (Honycomb Storage Wall) [UPDATED]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a holder for my honycomb storage wall and liked the model of @Riffnshred So I made a remix of it.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 64
- Wydruki
- 3
- Wyświetlenia
- 788
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
@DarkZed1_7301 Asked for a version with two spaces for a screwdriver so I edited the files :)
I do NOT own a second LTT Screwdriver or the new mini version of it so I cannot try the spacing myself. I hope it works.
If not please tell me :)
Every version but the the one for two srewdrivers and five bit storages can be printed with the MK3 or 4. It is just to big :D
-------------UPDATE--------------
In the files you will find models with holes, without ones and the Fusion360 file. Maybe you want to use different screws or what not, so you can either edit the stl files or use the fusion file ;)
There are a few different versions depending on how many Pocket size driver bit cases (also done by @Riffnshred) you have. The versions 4 and 5 can not be printed on the Mini.
If you have difficulties with with the holes, please tell me. I printed only version 5 but the spacing should be good for the other versions → depending on the orientation of the honeycomb wall!!! The corners should be on the side and the sides should be on the top and bottom of the hexagons.
If you attached it differently it might not work and you should edit the holes yourself into the models ;)