Godox TL60/TL120 Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for either the TL60 or TL120 from Godox for easy vertical placement.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 824
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed up a holder for the Godox TL60 and TL120 because I'm not a super fan of the thin metal wire deal to hang the lights from. This slides right onto the handle and has holes to embed your own ¼"-20 threaded inserts. I recommend and modeled the holes for these: https://www.mcmaster.com/94459A380/ and they work far better than the cheap ones you get on amazon or elsewhere.
I DO NOT RECOMMEND USING THESE TO HOLD THE LIGHTS AT AN EXTREME ANGLE
For printing I recommend using 4 walls and at least 15% infill for maximum strength. I may redesign these to print laying down for maximum layer strength but as long as you're using these for near vertical orientation they work great.