(Remix) Case for Osciloscope Scoppy (board DSO/FSCOPE-500K)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The case was made 36mm shorter because it didn't fit my print bed. I had to sacrifice the holes for the leds.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
Remix of Case for Osciloscope Scoppy from VladimirWaas_694872
This case accommodates the DSO/FSCOPE-500K boards from FHDM. The boards are based on the Raspberry Pi Pico and function as front-end for the Scoppy Oscilloscope firmware, which allows to use the Pi Pico as an oscilloscope using an Android Smartphone/Tablet as a display (Scoppy App).
I made it 36mm shorter because it didn't fit my print bed and had to sacrifice the holes for the led's.
The hole for the micro-usb port in this design only fits a Raspberry Pi Pico that has been directly soldered to the board. If you are using headers to be able to easily replace the Pico the hole won't allign correctly!
Link to original post: Case for Osciloscope Scoopy (board DSO/FSCOPE-500K) by Vladimír Waas | Download free STL model | Printables.com