Jumper Xiake 800 VTOL - Vented FPV Canopy #2 by Beastmode-Development
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supports Pitot Air Speed sensor ( Typical Pixhawk differential air speed ) & SIK Telemetry radio mount. Larger cooling
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Hello,
I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents.
This version has:
- Larger cooling vent design
- Pitot tube differential air speed sensor
- SIK Telemetry Radio 915mhz ( Case removed )
I've already replaced the flight controller with a Matek F405-VTOL, added better GPS/Compass & Airspeed sensor.
Enjoy !
Dave
Beastmode Development
Turns out this airplane design comes from the great work of Stephen Carlson's #MiniHawk-VTOL design work. I highly suggest checking out his work https://github.com/StephenCarlson/MiniHawk-VTOL
