Tripod for Google Nest Cam (Indoor, Wired)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small tripod to raise the Nest Cam level with the build plate of the MK3S+
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I wanted a small tripod to raise the Google Nest Cam level with the build plate of my MK3S+.
The holes in the top surface are suitable for M3 brass inserts (4.8mm) and the Cam is secured to the tripod with 2x M3x6 countersink screws.
There is a cable guide in the back leg to keep the power lead tidy. Version 2 of the model is uploaded where this cable guide has been cut short to allow the cable to naturally bend.
Printed in PETG (only because that's the only black filament I have at the moment) with no supports when built upside down.