Replacement part for pet bottle/tin can presser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our bottle presser's metal arm got destroyed with time so I gave PLA a chance and the result is absolutely incredible.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
The part is very simple but I thought someone could use it with customization, therefore the FreeCAD file is also here.
The part includes thin holes for washers (1.7mm dia) so friction is not degrading the replacement part.
I've printed it with PLA (Cura, Generic PLA, 200 Celsius nozzle, 60 Celsius bed) and a version printed with PETG (Cura, default PETG, 215 Celsius nozzle, 70 Celsius bed).
If you keep the thin holes for the washers I would advise using supports, but prepare with PETG it will be a bit sticky when you break it off.
I hope this small plan helps you in need.