Complicated Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A form over function hinge designed for my Ender 3 enclosure.
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 195
- Wydruki
- 1
- Wyświetlenia
- 3323
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
A form over function hinge designed for my Ender 3 enclosure. Due to my specific case the hinge is 47mm in depth from the door-mount, which works well when using a 3mm plexiglass door with an IKEA Lack enclosure. If you want to edit the hinge, a .step file is included.
Since Fusion apparently didn't care how I oriented parts before export, remember to lay them flat before printing.
Parts for a complete assembly:
Printed:
Door-mount: 1
Wall-mount: 1
Short Finger: 6
Long Finger: 6
Spacer: 9
Short Spacer: 6
Short Finger - top: 1
Long Finger - top: 1
(The "top"-variants don't have the friction-reducing bulge on the exposed holes.)
Bought:
50mm M3 machine screws: 7
5mm wood screw: 2
M3 screw (length depends on door thickness): 4
Print instructions
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: No
Resolution: 0.12 to 0.2
Infill: 16%
Filament: Clas Ohlson PETG Black
Notes:
Print with 3 perimeters for strength. PETG recommended for reduced friction and stronger parts.