Brome Squirrel Buster Standard Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filler Funnel for the Brome Squirrel Buster Standard to avoid spilling seed
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The Brome Squirrel Buster Standard feeder works really well for keeping squirrels from eating all of the bird seed but it can be a pain to fill without spilling seed all over. I put this together in FreeCAD to solve that.
Fill to bottom edge of funnel to avoid over filling.
Design notes:
- Designed to print wide end down with no supports.
- Center “tube” is to prevent spillage into the tiny holes in the center adjustment tube.
- Only one support for the tube because it's not load bearing and doesn't need more :)
- Intentionally thicker at the bottom of funnel for a little extra weight.
- I printed with 3 walls and 15% infill, but that's overkill really. Material doesn't really matter either.
- You could “cap” the tube over the center post, but I didn't find it necessary.
Use a Brim! There is very little contact with the bed. Unless your adhesion is spot on - a brim will save you some headaches.
Edit: Imported model into Plasticity to play with - the result is V2 - capped and with some added refinements. I'm still using V1, but V2 is prettier ;)