Airsoft AK-47 AEG Zenitco Style Handguards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zenitco B19 and B10U/M style handguards.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 464
- Wydruki
- 1
- Wyświetlenia
- 4392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed these from pictures to fit my Bulldog AEG AK-47. No idea if they're dimensionally accurate to the real thing, I just designed these in proportion to my AK. Take a look at the models and check if they will fit your model.
The lower handguard is designed like a B10U with slots for thin M5 nuts to mount the separately printed rails.
To mount each rail, you need:
- 6x thin M5 nuts. The ones I used are 2.6mm thick.
- 6x M5x10 Countersunk bolts.
It doesn't sit straight enough to use a laser properly, not sure if that's the mounting method, the print itself or the mounts for the laser I made.
The pictures were also taken before I got the countersunk bolts.
step files included so you could change the mounting hardware if you wanted to.
The foregrip in pictures is https://www.printables.com/model/138866-shade-vertical-foregrip