1 / 2
Petsfang Bullseye Base CR10 & Creality Spider 4.0 — zdjęcie 1
1 / 2

Petsfang Bullseye Base CR10 & Creality Spider 4.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Petsfang Bullseye Base for the CR10 and modified to fit the new Creality Spider 4.0

Ocena
0 / 5
Polubienia
3
Pobrania
49
Wydruki
0
Wyświetlenia
757
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Hello! This is the first time Ive modified/created anything. I hope this helps someone. Its a modified Bullseye base to fit a Creality Spider 4.0 hotend to a CR10/Ender. Its much wider and taller than the MK8 hotend and the wiring coming off the hotend doesnt allow for the support connection between the front/back so I deleted that and thickened the top. I have also deleted the arm sticking up from for the wiring because I switched to direct drive. Please excuse my wiring, I left all the legs long and I'll clean them up later. Feel free to modify it even better! 

however you printed the original, is how this should also be printed, with supports. 

Tagi