Stagetop single extruder dual colour chessboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chessboard for stagetop, for a single extruder, two colour print
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for stagetop, with diagonal squares raised 1mm so you can pause printing, change filament, and print in a second colour
Make sure to get the diagonal direction correct when placing, your near white corner diagonal should be on your right.
"stagetop chessboard sided.stl" has a ridge along one side, and a trench along the other, to help with alignment if that is useful.
These chessboards may be too small to be useful, my printer is too small to print the whole thing flat, so I'm currently printing the base pieces vertically, I'm using a Flashforge Adventurer 4, printing vertically a bit hotter than usual for layer adhesion seems to be working so far.
might need supports for the peg holes, but mine printed fine without supports